P 5
Please retain product label and instructions for future reference
Fit the Cover Trims to the front
and back of the building as
shown in the illustration using
30mm screws. Trim the length
of the cover trims to the
required size before fitting if
necessary.
Pre drill to avoid splitting.
12x30mm Screws
Step 8
30mm
screw
Pre drill
hole
7
7
7
Step 9
16x40mm Screws
Attach the fascias to the roof
leaving a slight overhang at the
top.
Fit the fascias to the roof over
the felt and secure in place with
40mm screws as shown.
Pre drill to avoid splitting.
Pre drill
hole
40mm
screw
11
13
13
11
11
11
14
Step 10
Use 4x30mm screws to fix
each beading strip onto the
door panel. Ensure that the
screw is parallel with the
door frame when fixing the
strip to the door panel as
shown in the close up view.
Line up the door block as
shown in the illustration.
Then fix with 2x30mm
screws by screwing through
the outside of the door into
the block.
10x30mm Screws
30mm
screw
Pre drill
hole
Pre drill
hole
30mm
screw
30mm
screw
9
12
