Mercia Garden Products 01DTSHRAX0604SDNW-V1, Общее руководство по инструкции

Страница: 4 / 10

P 4
Please retain product label and instructions for future reference
Step 3
Parts needed - No. 2, (or 1, or 3) QTY 1
No. 3 QTY 1
**Please note: The side panels are all
interchangeable and can be posititioned in
a variety of configurations. Decide which
works best before assembly. See Page 2 for
suggested options.**
Fix the corners of the Plain panel 2
(No. 3)
and a Plain Panel 1 (No. 2) (or panel
of your choice) with 50mm screws as shown
in diagram.
Do not secure the building to the floor until the
roof has been fitted,
Position the panels so there is equal spacing
between the floor and cladding on all sides.
3x50mm Screws
50mm
screw
Pre drill
hole
3
2
Step 4
Parts needed - No. 2, (or 1, or 3) QTY 1
No. 3, (or 1) QTY 1
Fix the corners of the Plain panel 1
(No. 2) (or panel of your choice) and the Plain panel 2
with 50mm screws as shown in diagram.
Fix the end of the Plain Panel 2 (No. 3) (or
panel of your choice) to the already standing chosen
panel with 50mm screws as shown in diagram.
Do not secure the building to the floor until the
roof has been fitted,
Position the panels so there is equal spacing
between the floor and cladding on all sides.
6x50mm Screws
50mm
screw Pre drill
hole
3
2
Step 5
Parts needed - No. 3 QTY 1
Fix the end of the Plain Panel 2
(No. 3)
(or
panel of your choice) to the already standing
chosen panel with 50mm screws as shown in
diagram.
Do not secure the building to the floor until
the roof has been fitted,
Position the panels so there is equal spacing
between the floor and cladding on all sides.
3x50mm Screws
50mm
screw
Pre drill
hole
3
1
Step 6
Parts needed - No. 1, (or 3) QTY 1
Fix the corners of the Door Panel
(No. 1)
(or panel of your choice) to the
plain panels (No. 2 or 3) with 50mm
screws as shown in diagram.
Do not secure the building to the
floor until the roof has been fitted,
Position the panels so there is equal
spacing between the floor and
cladding on all sides.
6x50mm Screws
50mm
screw Pre drill
hole