11
10
Vito Taxi |
Operation Manual
Seatbelts & head restraints
All seats within the vehicle are equipped with
three-point inertia reel seatbelts, (Fig. 21).
These should be securely fastened by all occupants
during vehicle transit. This is achieved by pulling the
strap over the shoulder and across the body.
The buckle should be securely fastened in the
adjoining catch.
To disengage the seatbelt, the passenger should press
the red catch release button and pass the retractable
strap back across their body.
The three forward-facing seats within the passenger
compartment each have an individual head restraint,
(Fig. 21).
The three rearward facing, fold-up passenger seats,
(Fig. 22) are positioned against the rear of the driver’s
compartment.
The division screen acts as a secure head restraint for
these three seats.
Lighting & visibility
Inside the passenger compartment, roof
mounted, bright LED lights assist passengers
in getting in and out of the vehicle, (Fig. 20).
These lights can be operated by both driver and
passenger. The driver may use the rear lights control
located on the taxi function panel (Fig. 17), whilst the
passengers also have a lights control located on either
side of the passenger compartment, (Fig. 18).
The driver has an additional light control on the taxi
function panel that enables the illumination of a drivers
light located within the driver’s compartment, (Fig. 17).
In addition to the in car lighting, are various high
visibility grab handles and high visibility seating strips,
(Fig. 19) to aid visibility in low level light and also to aid
the visually impaired.
Fig.17
Fig.18
Fig.19
Fig.20
Fig.21
Fig.22
Vito Taxi |
Operation Manual
