Mercedes-Benz smart Radio 10, Руководство по эксплуатации

Страница: 24 / 34

24 Radio mode >>
Radio mode >> Storing a station
Storing a station
To store a station you can use one of the
following methods:
- Storing manually by number buttons
- Storing by using Autostore
Storing manually by number buttons
For each waveband there are six presets
available, corresponding to the number
buttons.
쮿
Tune to the station to be stored.
쮿
Press one of the to buttons
and hold it down for at least three sec-
onds.
>
A short beep indicates that the sta-
tion is stored in the chosen memory
preset.
Storing by using Autostore
The Autostore function is available in all
wavebands. The search always proceeds
forwards.
The Autostore function assigns six sta-
tions according to their reception qual-
ity. These will be stored in the preset
memories in turn in the AM2 and FM2 band
respectively. If less than six stations
were found, the remaining preset memo-
ries will stay unchanged.
Starting the Autostore function
쮿
Switch over to the desired waveband.
쮿
Press the button for at least
three seconds.
> The Autostore seeks over the wave-
band and stores the identified sta-
tions.
> After finishing the search, the
smart Radio 10 switches over to the
AM2 and FM2 band respectively and
tunes in to the station stored in
memory preset 1.
Cancelling the Autostore function
쮿
Press any button.
>
The Autostore function is cancelled
and the identified stations will not
be stored.
>
The smart Radio 10 switches over to
the last tuned in station.
1 6
AM
FM
smart_radio_10_ae.book Seite 24 Dienstag, 17. Juli 2007 1:52 13