Mercedes-Benz SL320 R129 1997, Руководство по эксплуатации, Страница: 16 / 20

16
SCAN TRACKS
To scan in ascending order through the tracks on a
CD, press the Scan (SC) button. The magazine will
play each track for about eight seconds, then scan
up to the next track. SC and the track number being
played will appear in the display. This sequence will
repeat until either the Scan (SC), Seek or Tune
button is pressed. Selecting another mode or disc
or turning power OFF and ON again will also cancel
the Scan function.
SEEKING TRACKS
To go directly to the beginning of the track in
ascending order, press the right side of the Seek
button. To return to the beginning of the track being
played, press the left side of the Seek button.
Pressing the left side of the button repeatedly will
select tracks in descending order. If the Seek button
is pressed during the first 10 seconds of play, the
previous track will be selected. After 10 seconds,
the currently selected track will restart from the
beginning. The selected track number will appear in
the display.
FAST FORWARD/FAST REVERSE
To move rapidly forward through a track, press the
right side of the Tune button. To move rapidly in
reverse through a track, press the left side of the
Tune button. The audible signal can be used to
gauge your progress, and the display will indicate
elapsed time in minutes and seconds (MM:SS).
Notes For CD System Operation:
Extreme temperatures will affect the performance of
the CD system. However, optimum performance will
occur between 0 and 160 degrees Fahrenheit. If the
ambient temperature exceeds 160 degrees
Fahrenheit, CD TEMP A will appear on the display,
and play will stop. After 4 seconds, the mode which
was active prior to CD will resume. CD operation will
not resume until the temperature falls within the
optimum performance range.