Mercedes-Benz SL 55, Руководство оператора

Страница: 45 / 434

44
Getting started
Driving
Starting with KEYLESS-GO*
You can start your vehicle without the
SmartKey in the starter switch using the
KEYLESS-GO start/stop button on the
gear selector lever.
1 KEYLESS-GO start/stop button
왘
Make sure the gear selector lever is set
to
P .
왘
Depress the brake pedal during the
starting procedure. Do not depress ac-
celerator.
The selector lever lock is released.
왘
Press KEYLESS-GO start/stop
button
1 once.
The engine starts automatically if the
SmartKey with KEYLESS-GO is in the
vehicle.
For information on turning off the engine
with KEYLESS-GO, see “Turning off with
KEYLESS-GO*” (
컄
page 54).
Starting difficulties
If the engine does not start as described,
carry out the following steps:
왘
If you are starting the engine with the
SmartKey: Turn SmartKey in starter
switch to position
0 and repeat starting
procedure.
왘
If you are starting the engine with
KEYLESS-GO*: Close any doors that
may be open to allow for better detec-
tion of the SmartKey with
KEYLESS-GO.
Or:
Start the engine with the SmartKey as
radio signals from another source may
be interfering with the SmartKey with
KEYLESS-GO*.
왘
Repeat the starting procedure
(
컄
page 43). Remember that extended
starting attempts can drain the battery.
왘
Get a jump start (
컄
page 363).
If the engine does not start after several
starting attempts, there could be a mal-
function in the engine electronics or in the
fuel supply system.
왘
Notify an authorized Mercedes-Benz
Center.