Mercedes-Benz S 560 e, Руководство пользователя

Страница: 20 / 62

Configuring settings for plug-in hybrid vehi‐
cles
Multimedia system:
,
Vehicle
.
ð Hybrid
Starting the charging process
#
Select Charging Settings .
#
To start the charging process immedi‐
ately: select Charge Immediately .
#
To start the charging process in time for
the departure time: select At Departure
Time .
% The charging process starts so that your
vehicle will be fully charged, or charged as
much as possible, at the specified departure
time.
Setting the departure time
#
Select Edit Once-only Time .
#
Set a single departure time.
or
#
Select Week Profile .
#
Set the departure times for the week profile,
e.g. every day at 7:30 a.m.
% You can use the Pre-entry Climate Ctrl. menu
entry to jump directly to the departure time
setting for the pre-entry climate control
(
→
page 12).
To create an electricity price profile: you can
establish an electricity price profile via the
Mercedes me connect app. The charging proc‐
ess will then automatically take place at the
most favorable time. Further information can be
found in the separate Operating Instructions
under http://manuals.daimler.com/baix/cars/
connectme/en_GB/index.html.
%
The creation of an electricity price profile is
country-dependent and may not be available
in your country.
Displaying the consumption chart
#
Select Consumption .
The following information is displayed in the
consumption chart:
R
The amount of fuel used in the last time
intervals
R
Recuperation performance
R
Electrical consumption
Setting the maximum charge current
% The notes in the High-voltage battery section
must be strictly observed before setting the
charging current (
→
page 29).
% The option of setting the maximum charging
current is country-dependent and may not
be available in your country.
#
Select Max. Charge Current .
The following menus are available:
R
Maximum
R
8 Amps
R
6 Amps
#
Select the desired setting.
18 Multimedia system