Mercedes-Benz S 450 2019, Руководство оператора

Страница: 57 / 578

Before every trip, make sure that the LATCH-type
(ISOFIX) child restraint system is engaged cor‐
rectly in both mounting brackets in the vehicle.
* NOTE Be careful not to damage the seat
belt for the center seat when installing
the child restraint system
#
Make sure that the seat belt is not trap‐
ped.
#
Vehicles with reclining rear seats: Move
the reclining rear seat backrest down slightly
before the LATCH-type (ISOFIX) child
restraint system is installed.
#
Remove the upholstered lining 1 .
#
Vehicles without reclining rear seats: Fold
upholstered lining 1 upwards.
#
Turn the support on the rear side of uphol‐
stered lining 1 by 90°.
The upholstered lining 1 will remain folded
upwards.
#
Attach the LATCH-type (ISOFIX) child
restraint system to both mounting brackets
2 in the vehicle.
#
Vehicles with reclining rear seats: Return
the reclining rear seat backrest to an upright
position.
The reclining rear seat backrest must rest
against the child restraint system.
Securing Top Tether
& WARNING Risk of injury or death when
adjusting the seat after installing a child
restraint system
Vehicles with electrically adjustable rear
seats:
If you adjust the seat after installing a child
restraint system, the following may occur:
R
the seat belt may either sit too loose or
too tight
R
the child restraint system can become
loose, incorrectly positioned or damaged
As a result, the child restraint system may
not be able to provide the intended level of
protection.
#
Never adjust the seat after installing
the child restraint system.
If the child restraint system is equipped
with a Top Tether belt:
The risk of injury can be reduced by Top
Tether. The Top Tether belt facilitates an
Occupant safety 55