Controls in detail
13
En
gl
ish (
U
SA)
i
The control bar disappears after approx.
5 seconds. The control bar can be shown
again by touching the touchscreen or
operating the arrow buttons on the
remote control.
Pause
X
To stop playback:
Touchscreen:
Tap the
symbol
Remote control:
Press the
button
X
To start playback:
Touchscreen:
Tap the
symbol
Remote control:
Press the
button
Rewind/fast-forward
X
Touchscreen:
Slowly slide yellow
playback bar to the right or left.
Previous or next file
X
Tap the
or
symbol repeatedly or
press the
or
buttons on the
remote control until you reach the desired
file.
Adjusting the volume
X
Touchscreen:
Tap the
symbol and set
the desired volume with
(quieter) and
(louder).
X
Remote control:
Press the
(quieter) or
(louder) button.
X
Screen:
Press the
(quieter) or
(louder) button.
Setting the brightness
X
Touchscreen:
Tap the
symbol and set
the desired brightness with
(lighter)
and
(darker).
X
Remote control:
Select the
symbol
using the arrow keys and press
to
confirm. Set the desired screen brightness
with
(lighter) and
(darker).
Transferring content
Wi-Fi connection between end device
and screen
Content (music, videos and photos) can be
transferred from a Wi-Fi-enabled end device
to a screen of the Rear-Seat Entertainment
System.
Technical requirement:
^
End device is DLNA-enabled or
^
there is a DLNA-enabled app installed on
the end device
X
Establish a Wi-Fi connection between the
screen and the end device.
X
Activate the DLNA-enabled app on the end
device; see the manufacturer's operating
instructions.
X
Approve sharing of the desired media on
the end device itself.
Media is played back on the screen of the
Rear-Seat Entertainment System.
i
Operation occurs using the connected
end device; see the manufacturer's
operating instructions. Playback can be
(f)
Current playback mode:
Starts playback/slide show
Pause
(g) Switches to the previous file
(h) 00:59:00: Current playback time
01:33:00: Total playback time
(i)
Moves to the next file
(j)
Current volume setting
(k) Current brightness setting
(l)
23: Image currently being displayed
105: Total number of images in the
selected folder
