12
9. Select the destination.
10. Select
Start
.
Route guidance is started. The naviga-
tion screen appears in the display as
soon as the route has been calculated.
Selecting points of interest in the
vicinity
1. Select
Destination
in the navigati-
on menu.
2. Select
Nearby
POIs
.
3. Select a category, e.g.
Gas station
.
A list of gas stations in the vicinity ap-
pears.
4. Select the destination.
5. Select
Start
.
Route guidance is started. The naviga-
tion screen appears in the display as
soon as the route has been calculated.
Selecting points of interest along a
route
1. With route guidance active, select
Destination
in the navigation
menu.
2. Select
POIs along route
.
3. Select a category, e.g.
Gas station
.
A list of gas stations along the active
route appears.
4. Select the destination.
5. Select
Start
.
Route guidance is started. The naviga-
tion screen appears in the display as
soon as the route has been calculated.
Stopover
Entering a stopover
You can add a stopover to your route while
route guidance is active.
1. Select
Destination
in the navigati-
on menu.
2. Select a stopover from the list of sto-
povers or enter a destination manually.
3. Confirm the input as a
Stopover
.
Removing a stopover
1. Select
Destination
in the navigati-
on menu.
2. Select
Delete stopover
.
Note
Only the categories for which there are
points of interest at the selected destina-
tion are displayed for selection.
Special destinations recommended by
the Zagat Survey can be displayed, and
additional information (
ZAGAT info
)
about the places can be called up.
Note
The stopover is removed from the route
guidance without any further query.
Navigation system
MBA_BA_book.book Seite 12 Mittwoch, 2. September 2009 1:30 13
