background image

•  WARNING: Always tighten fasteners to the correct 

torque. Bolts that are too tight can stretch and 
deform. Bolts that are too loose can move and 
fatigue. Either mistake can lead to failure of the 
bolt, causing you to lose control and fall.

•  WARNING: An insufficiently tightened stem clamp 

bolt, handlebar clamp bolt or bar end extension 
clamping bolt may compromise steering action, 
which could cause you to lose control and fall. 
Place the front wheel of the bicycle between your 
legs and attempt to twist the handlebar/stem 
assembly. If you can twist the stem in relation to 
the front wheel, turn the handlebars in relation to 
the stem, or turn the bar end extensions in relation 
to  the  handlebar,  the  bolts  are  insufficiently 
tightened.

•  WARNING: Do not expose your battery to high 

temperatures. Do not leave or charge your eBike 
battery outside, in a car or inside a garage if it is hot 
out. Heat is by far the largest factor when it comes 
to reducing lithium-ion battery and exposure to 
heat can cause injury.

•  WARNING: Riding with improperly adjusted brakes 

or worn brake pads is dangerous and can result in 
serious injury or death.

•  WARNING: Wet weather impairs traction, braking 

and visibility, both for the bicyclist and for other 
vehicles sharing the road. The risk of an accident is 
dramatically increased in wet conditions.

•  WARNING: Never inflate a tire beyond the maximum 

pressure marked on the tire’s sidewall or the wheel 
rim. If the maximum pressure rating for the wheel 
rim is lower than the maximum pressure shown on 
the tire, always use the lower rating. Exceeding the 
recommended maximum pressure may blow the 
tire  off  the  rim  or  damage  the  wheel  rim,  which 
could cause damage to the bike and injury to the 
rider and bystanders. The best and safest way to 
inflate a bicycle tire to the correct pressure is with 
a bicycle pump which has a built-in pressure gauge.

•  WARNING: Applying brakes too hard or too 

suddenly can lock up a wheel, which could cause 
you to lose control and fall. Sudden or excessive 
application of the front brake may pitch the rider 
over the handlebars, which may result in serious 
injury or death.

•  WARNING: Correct tightening force on fasteners – 

nuts, bolts, screws – on your bicycle is important. 
Too little force, and the fastener may not hold 
securely. Too much force, and the fastener can 

strip threads, stretch, deform, or break. 

•  WARNING: Riding with an improperly tightened 

seat post can allow the saddle to turn or move and 
cause you to lose control and fall.

•  CAUTION: Be careful not to damage the disc, 

calliper or brake pads when re-inserting the disc 
into the calliper. Never activate a disc brake’s 
control lever unless the disc is correctly inserted 
in the calliper.

•  WARNING: If you can fully close the cam lever 

without wrapping your fingers around the seat post 
or a frame tube for leverage, and the lever does 
not leave a clear imprint in the palm of your hand, 
the tension is insufficient. Open the lever; turn the 
tension adjusting nut clockwise a quarter turn; 
then try again.

7/ Warnings

16

Содержание n+ Championship Edition



















Отзывы: