Configuring DYNAMIC SELECT (multimedia
system)
Multimedia system:
4
©
5
Settings
5
Vehicle
5
DYNAMIC SELECT
Setting drive program I
#
Select
Individual Config.
.
#
Select and set a category.
Switching the reset display on/off
#
Switch
Request at Start
on or off.
Function on: the next time the vehicle is started
a prompt appears asking whether the last active
drive program should be restored.
%
The prompt appears only if the previously
active settings deviate from the standard
settings.
Function off: if the
Î
drive program was the
last one active, and all requirements for the drive
program are fulfilled, this will be automatically
selected the next time the vehicle is started. If
another program was active, then the
A
drive
program is set automatically.
%
This function must be activated for each user
profile separately. The drive program for the
respective user profile of the last driver is
only stored if this function is activated.
Driving and driving safety systems
Activating/deactivating ESP
®
(Electronic Sta‐
bility Program)
Multimedia system:
4
©
5
Settings
5
Quick Access
%
ESP
®
can only be activated/deactivated
using quick access when at least one other
function is available in quick access. ESP
®
can otherwise be found in the
Assistance
menu.
#
Select
ESP
.
A prompt appears.
#
Select
On
or
å
Off
.
%
When ESP
®
is activated, the electric motor
starts. If drive program
Î
was selected
beforehand, then drive program
A
will be
automatically selected, as the engine cannot
be started in drive program
Î
.
ESP
®
is deactivated if the
å
ESP
®
OFF warn‐
ing lamp lights up continuously in the instrument
cluster.
Observe the information on warning lamps and
display messages which may be shown in the
instrument cluster.
Regenerative brake system
Function of the regenerative brake system
Depending on the selected recuperation level,
the electric motor is operated as an alternator
when in overrun mode and during braking in
order to charge the high-voltage battery while
driving. As soon as you release the accelerator
pedal when the vehicle is in motion, recupera‐
tion in overrun mode is initiated.
The regenerative brake system has the following
characteristics:
R
Supports braking with an electronically con‐
trolled brake force boosting
28 Driving and parking