Mercedes-Benz GLB 2023, Руководство оператора

Страница: 350 / 462

Vehicles with a tire pressure monitoring sys-
tem: if an emergency spare wheel is installed,
the tire pressure monitoring system cannot
function reliably. For a few minutes after an
emergency spare wheel is installed, the sys-
tem may still display the tire pressure of the
removed wheel. Only restart the system again
when the emergency spare wheel has been
replaced with a new wheel.
Be sure to also observe the following further rela-
ted subjects:
R
Notes on tire pressure (
/
page 319)
R
Tire and Loading Information placard
(
/
page 326)
R
Tire pressure table (
/
page 321)
R
Notes on installing tires (
/
page 337)
R
Installing an emergency spare wheel
(
/
page 342)
Inflating the emergency spare wheel
*
NOTE Overheating due to the tire inflation
compressor running too long
#
Do not run the tire inflation compressor
for longer than ten minutes without inter-
ruption.
Requirements:
R
The emergency spare wheel has been installed
correctly. (
/
page 342)
%
Comply with the manufacturer's safety notes
on the sticker of the emergency spare wheel
and on the tire inflation compressor.
#
Remove the sticker with the label 50 mph
(80 km/h) from the tire inflation compressor
housing and affix it to the instrument cluster
within the driver's field of vision.
#
Remove the tire inflation compressor from the
stowage space under the trunk floor.
(
/
page 301)
#
Pull filler hose 1 and plug 3 out of the tire
inflation compressor housing.
#
Insert plug 7 of filler hose 1 in the socket
on the tire inflation compressor and then turn
it until plug 7 engages.
#
Unscrew the cap from the valve on the emer-
gency spare wheel.
#
Screw union nut 2 of filler hose 1 onto the
valve.
#
Make sure on and off switch 4 of the tire
inflation compressor is set to 0.
#
Insert plug 3 in a socket in your vehicle.
R
12 V socket: (
/
page 124)
348 Wheels and tires