Mercedes-Benz G 500, Руководство оператора

Страница: 202 / 376

202
Controls in detail
Useful features
Operation of integrated remote control
왘
Switch on ignition.
왘
Select and press the appropriate inte-
grated signal transmitter button (
2
,
3
or
4
) to activate the remote con-
trolled device.
The integrated remote control trans-
mitter continues to send the signal as
long as the button is pressed – up to
20 seconds.
Erasing the integrated remote control
memory
왘
Switch on ignition.
왘
Simultaneously hold down the signal
transmitter buttons
2
and
4
, for ap-
proximately 20 seconds, until the indi-
cator lamp
1
blinks rapidly. Do not
hold for longer than 30 seconds.
The codes of all three channels are
erased.
Reprogramming a single integrated sig-
nal transmitter button
To program a device using a signal trans-
mitter button previously trained, follow
these steps:
왘
Press and hold the desired signal trans-
mitter button (
2
,
3
or
4
). Do not re-
lease the button.
왘
The indicator lamp will begin to flash af-
ter 20 seconds. Without releasing the
integrated signal transmitter button,
proceed with programming starting
with step 3.
i
If you sell your vehicle, erase the codes
of all three channels.