Mercedes-Benz EQS 350, Руководство оператора

Страница: 226 / 581

Combo 2 vehicle socket
#
Press charging interruption button 2 .
The charging process is ended. Status display
1 lights up white. The vehicle socket is
unlocked.
#
Remove the charging cable connector from
the vehicle socket within 30 seconds 3 .
After the 30 seconds have elapsed, the vehicle
socket will be locked again and the charging
process will resume.
%
If you cannot remove the charging cable con-
nector, repeat the unlocking procedure. If the
charging cable connector is still locked, con-
tact a qualified specialist workshop.
%
Status display 1 indicator lamp remains lit
for some time after the charging cable con-
nector has been removed and then goes out.
#
Close the socket flap.
For vehicles with an electric socket flap,
observe the following notes on closing the
socket flap.
#
Remove the charging cable connector from
the mains socket, or from the socket on the
wallbox/charging station, and stow the vehi-
cle's charging cable safely in the vehicle
(
/
page 211).
The electric socket flap closes automatically in
the following situations:
R
shortly after the charging cable connector has
been removed
R
after the socket flap has been tapped in the
direction to close it
R
after transmission position
i
,
h
or
k
has
been engaged
Automatic reversing function of the electric
socket flap
If an obstacle impedes the electrical socket flap
while it is closing, the socket flap will open again
automatically.
#
When closing the socket flap, make sure that
no body parts or objects are in the closing
area.
Starting the direct current charging process
(mode 4)
&
DANGER Risk of death when charging at a
damaged socket
The charging process uses high voltage.
Driving and parking 223