Mercedes-Benz EQS 2021, Руководство оператора

Страница: 225 / 928

Operating the combination switch for the lights
1
High beam
2 Turn signal light, right
3
Headlamp flashing
4 Turn signal light, left
#
Use the combination switch to select the
desired function.
Switching on high beam
#
Turn the light switch to the
L
or
Ã
position.
#
Push the combination switch in the direction
of arrow 1 .
When the high beam is activated, the indicator
lamp for low beam
L
will be deactivated
and replaced by the indicator lamp for high
beam
K
.
Switching off high beam
#
Push the combination switch in the direction
of arrow 1 or pull it in the direction of arrow
3 .
Headlamp flashing
#
Pull the combination switch in the direction of
arrow 3 .
Turn signal light
#
To indicate briefly: push the combination
switch briefly to the point of resistance in the
direction of arrow 2 or 4 .
The corresponding turn signal light will flash
three times.
#
To indicate permanently: push the combina-
tion switch beyond the point of resistance in
the direction of arrow 2 or 4 .
Vehicles with Active Lane Change Assist:
R
A turn signal indicator activated by the
driver may continue to operate for the
duration of the lane change.
R
If the driver indicated directly beforehand
but a lane change was not immediately
possible, the turn signal indicator may acti-
vate automatically.
Light and sight 223
ohne