Mercedes-Benz E-Class Coupe 2020, Руководство пользователя

Страница: 306 / 473

To avoid damage to your vehicle when using a
car wash, ensure the following beforehand:
R
Active Distance Assist DISTRONIC is deacti‐
vated.
R
The HOLD function is switched off.
R
the 360° Camera or the reversing camera is
switched off.
R
the side windows and sliding sunroof are
completely closed.
R
the blower for the ventilation/heating is
switched off.
R
the windscreen wiper switch is in position
g .
R
the key is located at least 3 m away from the
vehicle. Otherwise the boot lid could open
unintentionally.
R
in car washes with a conveyor system: neu‐
tral i is engaged.
% In car washes with a conveyor system: if you
leave the vehicle while it is being washed,
make sure the key is located in the vehicle.
The park position j is otherwise automati‐
cally engaged.
% If, after the car wash, you remove the wax
from the windscreen and wiper rubbers, this
will prevent smearing and reduce wiper
noise.
Information on using a high-pressure cleaner
&
WARNING Risk of an accident when
using high-pressure cleaners with round-
spray nozzles
The water jet can cause externally invisible
damage.
Components damaged in this way may unex‐
pectedly fail.
#
Do not use a high-pressure cleaner with
round-spray nozzles.
#
Have damaged tyres or chassis parts
replaced immediately.
To avoid damage to your vehicle, observe the fol‐
lowing when using a high-pressure cleaner:
R
keep the key at least 3 m away from the vehi‐
cle. Otherwise the boot lid could open unin‐
tentionally.
R
maintain a distance of at least 30 cm to the
vehicle.
R
vehicles with decorative foil: parts of your
vehicle are covered with a decorative foil.
Maintain a distance of at least 70 cm
between the foil-covered parts of the vehicle
and the nozzle of the high-pressure cleaner.
Move the high-pressure cleaner nozzle
around whilst cleaning. The water tempera‐
ture of the high-pressure cleaner must not
exceed 60°C.
R
observe the information on the correct dis‐
tance in the equipment manufacturer's oper‐
ating instructions.
R
do not direct the nozzle of the high-pressure
cleaner directly at sensitive parts, e.g. tyres,
gaps, electrical components, batteries, light
sources and ventilation slits.
Maintenance and care 303