X
Vehicles with AMG equipment: fold
cover
;
upwards.
X
Position jack
?
at jacking point
=
.
X
Make sure the foot of the jack is directly
beneath the jacking point.
X
Turn crank
A
clockwise until jack
?
sits
completely on jacking point
=
. The base of
the jack must lie evenly on the ground.
X
Turn crank
A
until the tire is raised a maxi-
mum of 1.2 in (3 cm) from the ground.
Removing a wheel
!
Do not place wheel bolts in sand or on a dirty
surface. The bolt and wheel hub threads could
otherwise be damaged when you screw them
in.
X
Unscrew the uppermost wheel bolt com-
pletely.
X
Screw alignment bolt
:
into the thread
instead of the wheel bolt.
X
Unscrew the remaining wheel bolts fully.
X
Remove the wheel.
Mounting a new wheel
G
WARNING
Oiled or greased wheel bolts or damaged
wheel bolts/hub threads can cause the wheel
bolts to come loose. As a result, you could
lose a wheel while driving. There is a risk of
accident.
Never oil or grease wheel bolts. In the event of
damage to the threads, contact a qualified
specialist workshop immediately. Have the
damaged wheel bolts or hub threads
replaced/renewed. Do not continue driving.
G
WARNING
If you tighten the wheel bolts or wheel nuts
when the vehicle is raised, the jack could tip
over. There is a risk of injury.
Only tighten the wheel bolts or wheel nuts
when the vehicle is on the ground.
Always pay attention to the instructions and
safety notes in the "Changing a wheel" section
(
Y
page 303).
306
Changing a wheel
Whee
ls
an
d
tire
s
Содержание E-Class Cabriolet 2016
Страница 321: ...319 ...
Страница 322: ...320 ...