Mercedes-Benz E 400 HYBRID 2014, Дополнительные эксплуатационные инструкции

Страница: 30 / 52

Useful information
i
This Operator's Manual describes all
models and all standard and optional
equipment of your vehicle available at the
time of publication of the Operator's
Manual. Country-specific differences are
possible. Please note that your vehicle may
not be equipped with all features
described. This also applies to safety-
related systems and functions.
i
Read the information on qualified
specialist workshops: (
Y
page 7).
Displays and operation
Coolant temperature display
The coolant temperature can only be called
up on the on-board computer.
X
Press = or ; on the steering wheel
to select the Serv. menu.
X
Press 9 or : to select Coolant .
Electric motor performance display
The electric motor power display in the
instrument cluster shows:
R
how much of the maximum available
electric motor output is currently being
used
R
how much electrical energy is being
delivered through recuperation
Upper area : shows the output obtained
from the electric motor, e.g. when driving
using the electric motor or with the boost
function. During electric drive, the engine
starts up when the display reaches the "MAX"
mark at the top. This allows you to control
how much the electric drive is used at low
speeds.
Lower area
; shows the recuperated output
which is stored in the high-voltage battery as
electrical energy. When the indicator reaches
the mark at the bottom, this means that the
recuperative braking power has been fully
utilized. The service brake is activated.
Operating the on-board computer
i
For information about operating the on-
board computer and COMAND, see the
vehicle Operator's Manual.
You can display the current operating mode
of the hybrid system in the multifunction
display and the COMAND display.
In the COMAND display, you can also call up
a graphic display of the fuel consumption and
generated electricity (
Y
page 31).
Menus and submenus
Selecting a submenu in the
multifunction display
X
Press the = or ; button on the
steering wheel to select the Trip menu.
X
Press 9 or : to select Energy
Flow .
Selecting a submenu in the COMAND
display
X
To call up the full screen display: press
the W button.
The clock is shown in the COMAND display
X
Slide ZV the COMAND controller up until
the Full Screen option is selected.
28
Menus and submenus
On-board
computer
and
displays