Driving systems
137
Switching on Distronic, storing the cur-
rent speed and maintaining it
If Distronic is not activated after the cruise
control lever is pressed, you will see the mes-
sage
- - -
in the multi-function display.
You cannot activate Distronic under the fol-
lowing circumstances:
R
if you are driving slower than 30 km/h or
faster than 180 km/h
R
when braking
R
when you have applied the parking brake
R
If ESP
®
is deactivated
R
when the selector lever is in position
P, R
or
N
R
for two minutes after the engine is started
X
Accelerate the vehicle to the desired
speed.
X
Briefly press the cruise control lever up
1
or down
4
.
X
Remove your foot from the accelerator
pedal.
Distronic is activated. The vehicle main-
tains the stored speed until the distance to
the vehicle in front becomes too small.
i
If you do not fully release the accelerator
pedal, the
DISTRONIC override
message
appears in the multi-function display. The
distance to a slower-moving vehicle in front
will not then be governed. You will be driv-
ing at the speed you determine by the posi-
tion of the accelerator pedal.
Setting a speed
X
Press the cruise control lever up
1
for a
higher speed or down
4
for a lower speed.
X
Keep the cruise control lever pressed until
the desired speed is reached.
X
Release the cruise control lever.
The new speed is stored.
i
Distronic is not deactivated if you depress
the accelerator pedal. If you accelerate
briefly to overtake, Distronic adjusts the
vehicle's speed to the last speed stored
after you have finished overtaking.
i
Deceleration of the vehicle by means of
the cruise control lever is assisted by auto-
matic application of the brakes. On long
downhill gradients, the automatic trans-
mission shifts down as a further measure.
Making adjustments in 1 km/h incre-
ments
X
For a higher speed: briefly pull the cruise
control lever towards you
3
.
or
X
Keep the cruise control lever pulled
towards you
3
until the desired speed is
reached.
Adjustment in 10 km/h increments
X
Briefly press the cruise control lever up
1
for a higher speed or down
4
for a
lower speed.
The last speed stored is increased or
reduced.
Selecting the current or last stored
speed
Only select a stored speed if you know what
that speed is and whether it is suitable for
the current situation. Otherwise, sudden
acceleration or braking could endanger you
or others.
Controls
219_AKB; 2; 4, en-GB
mkalafa,
2007-11-13T09:28:36+01:00 - Seite 137
Содержание CLS 280 2008
