Mercedes-Benz C 250 Coupe, Руководство оператора

Страница: 128 / 336

SmartKey positions in the ignition lock. This
is only the case if you are not depressing the
brake pedal.
If you depress the brake pedal and press the
Start/Stop button, the engine starts
immediately.
The Start/Stop button can be removed from
the ignition lock. Then, you can insert the
SmartKey into the ignition lock.
i You do not have to remove the Start/Stop
button from the ignition lock when you
leave the vehicle. However, you should
always take the SmartKey with you when
leaving the vehicle. The vehicle can be
started with the Start/Stop button if the
SmartKey is in the vehicle.
:
Start/Stop button
;
Ignition lock
X
Insert Start/Stop button
:
into ignition
lock
;
.
i When you insert Start/Stop button
:
into ignition lock
;
, the system requires a
detection time of approximately two
seconds before you can use Start/Stop
button
:
.
Start/Stop button
=
USA only
?
Canada only
X
Position 0: if Start/Stop button
:
has not
yet been pressed, this corresponds to the
SmartKey being removed from the ignition.
X
Position 1: press Start/Stop button
:
.
You can now activate the windshield
wipers, for example.
i If you then open the driver's door when in
this position, the power supply is
deactivated.
X
Position 2 (ignition): press Start/Stop
button
:
twice.
i If you press Start/Stop button
:
once
when in this position and the driver's door
is open, the power supply is deactivated
again.
As soon as the ignition is switched on, all the
indicator lamps in the instrument cluster light
up. If an indicator lamp does not go out after
the engine is started or if it lights up while the
vehicle is in motion, see (
Y
page 229).
Starting the engine
Important safety notes
G
WARNING
Inhalation of exhaust gas is hazardous to your
health. All exhaust gas contains carbon
monoxide (CO), and inhaling it can cause
unconsciousness and possible death.
126
Driving
Driving and parking