Mercedes-Benz C 240, Руководство оператора

Страница: 82 / 482

80
Safety and Security
Occupant safety
왘
Securely fasten hook 2 , which is part
of the tether strap, to anchorage
ring
1 .
1 Anchorage ring
2 Hook
Once the top tether anchorage hook is
attached, the child restraint itself can be
secured. Tighten the top tether strap
according to the child restraint
manufacturer’s instructions.
Child seat anchors – LATCH-type
This vehicle is equipped with two LATCH-
(Lower Anchors and Tethers for CHildren)
type anchors (at each of the outer rear
seats) for the installation of a LATCH-type
child seat with the matching mounting
fittings.
To fold anchors out
The foldable LATCH-type anchors are
located between the seat cushion and the
backrest.
1 Anchors
2 Button
왘
Grip inner side of anchors 1 and fold
forward until they audibly lock in place.
왘
Install child seat according to the
manufacturer’s instructions.
i
For safety, make sure the hook 2 has
attached to the ring 1 beyond the
safety catch, as illustrated.
i
If a child seat is not installed, the
LATCH-type anchors can be folded
back between the seat cushion and the
backrest (
컄
page 81).
i
The child seat must be firmly attached
in the right and left side anchors
1 .
With a child seat installed in the left
rear seat, the seat belt for the center
seat occupied by a passenger must op-
erate freely. Guide seat belt between
its seat cushion mount and backrest
mount along outside of right side child
seat anchor.
컄컄