Mercedes-Benz AMG CLS 2019, Руководство пользователя

Страница: 11 / 46

Driving
Breaking-in notes
To preserve the engine during the first
1,000 miles (1,500 km):
R
Drive at varying road speeds and engine
speeds.
R
Do not drive faster than 85 mph (140 km/h).
R
Only briefly allow the engine to reach a maxi‐
mum engine speed of 4,500 rpm
(4,500 rpm).
R
Drive the vehicle in drive program A
or ; .
R
Change gear before the tachometer needle is
Ô of the way to the red area of the tachome‐
ter.
R
Do not shift down a gear manually in order to
brake.
R
Avoid overstraining the vehicle, e.g. driving at
full throttle.
R
Do not depress the accelerator pedal past
the pressure point (kickdown).
R
Only increase the engine speed gradually and
accelerate the vehicle to full speed after
1,000 miles (1,500 km).
This also applies when the engine or parts of the
drivetrain have been replaced.
Please also observe the following breaking-in
notes:
R
In certain driving and driving safety systems,
the sensors adjust automatically while a cer‐
tain distance is being driven after the vehicle
has been delivered or after repairs. Full sys‐
tem effectiveness is not reached until the
end of this teach-in process.
R
Brakepads, brake discs and tires that are
either new or have been replaced only ach‐
ieve optimum braking effect and grip after
several hundred kilometers of driving. Com‐
pensate for the reduced braking effect by
applying greater force to the brake pedal.
Notes on the locking differential
After a breaking-in period of 2000 miles
(3000 km) the oil on the locking differential
should be changed in a qualified specialist work‐
shop. This oil change prolongs the service life of
the locking differential.
Operation of the ECO start/stop function
The engine is automatically switched off if the
following conditions are met:
R
you have selected drive program A
or ; .
R
you brake the vehicle to a standstill in trans‐
mission position h or i .
R
if all vehicle conditions for an automatic
engine stop are met.
The è symbol appears in the multifunction
display when the vehicle is stationary.
The engine is restarted automatically if:
R
you release the brake pedal in transmission
position h when the HOLD function is not
active.
R
you shift from transmission position j .
R
you engage transmission position h or k .
R
you depress the accelerator pedal.
Driving and parking 9