Mercedes-Benz ACTROS 2002, Руководство по эксплуатации, Страница: 207 / 620

202
Controls in detail
Driver information system
1
2
3
4
5
6
7
8
9
Engine oil grade display
The engine oil grade must be set in accord-
ance with the data sheet values from
Mercedes-Benz Specifications for Service
Products. The higher the data sheet value,
the higher the engine oil grade level. The
data sheet value in the fluids/
lubricants
menu must be the same as that of the en-
gine oil actually used.
Observe the "Fluids, lubricants and capac-
ities" section (
page 569).
Engine oil viscosity menu ( page 200).
Calling up the Engine oil grade menu
With the vehicle stationary and the parking
brake applied
Call up the Settings menu
(
page 184).
Press the
ç
button on the multi-
function steering wheel until the high-
light is on
Fluids/lubricants
.
Press the
j
button on the multi-
function steering wheel until the multi-
function display shows
Engine oil
grade .
Changing the engine oil grade
!
Risk of engine damage. If possible, do
not mix engine oils of different grades.
If you mix engine oils of different
grades, the data from the poorest
grade must be entered in the fluids/ lu-
bricants menu. The periods for chang-
ing the engine oil are more frequent
compared with those for engine oil of
the same grade.
i
Use a pointed object, such as a pen, to
press the reset button in the instru-
ment panel.
Observe the "Fluids, lubricants and ca-
pacities" section (
page 556).