Mercedes-Benz ACTROS 2002, Руководство по эксплуатации

Страница: 205 / 620

200
Controls in detail
Driver information system
1
2
3
4
5
6
7
8
9
Changing fuel sulphur content Select the fuel sulphur content display
(
page 199).
Press and hold the reset button (for ap-
proximately one second) in the instru-
ment panel until the desired fuel
sulphur content is shown in the multi-
function display or until
FAME is shown
if biodiesel is being used.
The fuel sulphur level or FAME (if
biodiesel is used) as seen on the
screen is then set.
Quitting the fuel sulphur level display
Press the
è
or
ÿ
button on the
multi-function steering wheel to select
the previous or next menu
or
Press the
j
or
k
button on the
multi-function steering wheel to select
the previous or next display.
Engine oil viscosity display
The engine oil viscosity value in the fluids/
lubricants menu must be the same as the
viscosity class (SAE class) of the oil in the
engine.
Engine oil grade display ( page 202).
Observe the "Fluids, lubricants and capac-
ities" section (
page 569).
i
To press the reset button in the instru-
ment panel, use a pointed object, such
as a pen.
Observe "Fuel sulphur content" chart
(
page 567).
!
Always use a viscosity class appropri-
ate for the ambient temperature
(
page 558).