Mercedes-Benz 260 E 124 1987, Руководство пользователя

Страница: 56 / 113

Showing the “old” setting first allows
for reconsideration of the decision
to store. If it is desirable to leave the
“old” station in memory rather than
exchanging it with the “ new” one,
quickly release the button. The “old”
station will remain in memory.
Any AM station can be stored similarly
on any button marked QQ]
through
Stereo reception
The stereo indicator
h m
:
i
=
m
lights up
if a stereo program in the AM or FM
band is received.
Note: Since some AM stereo broad­
casting is not compatible with your
car radio reception capabilities, you
may experience limited AM stereo
reception in some areas. The radio
receives AM stereo programs which
are broadcast via the C-Quam AM
stereo system.
The radio is equipped with an automa­
tic stereo/mono switch that electroni­
cally switches to mono for clear recep­
tion if a weak signal is received.
The stereo indicator will remain lit
even if the receiver has changed to
the mono mode and will turn off at
an antenna signal considered insuffi­
cient to provide acceptable reception
quality.
Note: Although FM is normally static
free, reception qualitiy can be limited
by geographic and atmospheric condi­
tions, station strength and distance
from transmitter. Buildings or other
obstructions can cause momentary
static, flutter or station swapping. If
good reception cannot be obtained,
tune to a stronger station.
Tape cassette playback
It is recommended to use only good
quality cassettes with a playback time
of not more than 90 minutes (C 90).
To start playback, insert a cassette
(tape side first, side “ 1” or “A” facing
up) through the cassette door. Push
the cassette in until it is locked in its
playing position.
When the end of one playing side is
reached, the unit switches automati­
cally to reverse for playing the second
track.
The tape track can be selected by
depressing the cassette track button
Q H ■ The built-in indicators show
which track of the cassette the unit is
playing back.
To stop playback, press the eject but­
ton H I - The unit will automatically
eject the cassette and switch to radio
reception.
For fast tape rewind press the fast
rewind button [ 3 9 • The button will
lock into position until the end of the
tape is reached or until the eject H I
or fast forward button H I is acti­
vated.
Accordingly, for fast forward of the
tape, press the fast forward button
E l
To replay cassettes recorded using
the Dolby B noise reduction system,
the Dolby NR button H I should be
pressed in. This reduces tape hiss.
When the radio is turned off by press-
ing the “OFF” side of the E Q 9 H 3 I
button or by turning the key to steering
lock position 0, the cassette will auto­
matically be ejected.
Tape equalization
For good reproduction quality it is ne­
cessary to adjust the tape player for
the particular type of tape being used.
Press the CR button H | for all
cassettes except ferric dioxide casset­
tes (Fe20 3). If the button H I is not
pressed, the tape recorder is adjusted
to ferric dioxide cassettes (Fe20 3).
54