Mercedes-Benz 2016 SLK, Руководство оператора

Страница: 75 / 358

The SmartKey centrally locks/unlocks:
R
the doors
R
the trunk lid
R
the stowage compartment in the center
console
R
the fuel filler flap
The turn signals flash once when unlocking
and three times when locking.
You can also set an audible signal to confirm
that the vehicle has been locked. The audible
signal can be activated and deactivated using
the on-board computer (
Y
page 206).
When it is dark, the surround lighting also
comes on if it is activated in the on-board
computer (
Y
page 205).
KEYLESS-GO
General notes
Bear in mind that the engine can be started by
any of the vehicle occupants if there is a KEY-
LESS-GO key in the vehicle.
Locking/unlocking centrally
You can start, lock or unlock the vehicle using
KEYLESS-GO. To do this, you only need carry
the SmartKey with you. You can combine the
functions of KEYLESS-GO with those of a con-
ventional SmartKey. Unlock the vehicle by
using KEYLESS-GO, for instance, and lock it
using the & button on the SmartKey.
When locking or unlocking with KEYLESS-GO,
the distance between the SmartKey and the
corresponding door handle must not be
greater than 3 ft (1 m).
A check which periodically establishes a radio
connection between the vehicle and the
SmartKey determines whether a valid Smart-
Key is in the vehicle. This occurs, for example:
R
when the external door handles are
touched
R
when starting the engine
R
while the vehicle is in motion
X
To unlock the vehicle: touch the inner
surface of the door handle.
X
To lock the vehicle: touch sensor sur-
face : .
X
Convenience closing feature: touch
recessed sensor surface ; for an exten-
ded period.
Further information on the convenience
closing feature (
Y
page 85).
X
To unlock the trunk lid: pull the handle on
the trunk lid.
The vehicle only unlocks the trunk lid.
Deactivating and activating
If you do not intend to use a SmartKey for an
extended period of time, you can deactivate
the KEYLESS-GO function of the SmartKey.
The SmartKey will then use very little power,
thereby conserving battery power. For the
purposes of activation/deactivation, the
vehicle must not be nearby.
X
To deactivate: press the & button on
the SmartKey twice in rapid succession.
The battery check lamp (
Y
page 75) of the
SmartKey flashes twice briefly and lights up
once, then KEYLESS-GO is deactivated.
X
To activate: press any button on the
SmartKey or insert the SmartKey into the
ignition lock.
KEYLESS-GO and all of its associated fea-
tures are available again.
SmartKey
73
Opening
and
closing
Z