Mercedes-Benz 2016 GLA, Руководство оператора

Страница: 327 / 390

!
Do not operate the tire inflation compres-
sor for longer than eight minutes at a time
without a break. It may otherwise overheat.
The tire inflation compressor can be oper-
ated again once it has cooled down.
Comply with the manufacturer’s safety
instructions on the sticker on the tire inflation
compressor.
Using the TIREFIT kit
X
Do not remove any foreign objects which
have penetrated the tire, e.g. screws or
nails.
X
Remove the tire sealant bottle, the accom-
panying TIREFIT sticker and the tire infla-
tion compressor from the stowage well
underneath the cargo compartment floor
(
Y
page 322).
X
Affix part : of the TIREFIT sticker to the
instrument cluster within the driver's field
of vision.
X
Affix part ; of the TIREFIT sticker near the
valve on the wheel with the defective tire.
X
Pull connector ? with the cable and hose
A out of the tire inflation compressor
housing.
X
Screw hose A onto flange B of tire seal-
ant bottle : .
X
Place tire sealant bottle : head down-
wards into recess ; of the tire inflation
compressor.
X
Remove the cap from valve C on the faulty
tire.
X
Screw filler hose D onto valve C .
X
Insert plug ? into a 12 V socket in your
vehicle.
Observe the notes on sockets
(
Y
page 291).
X
Turn the SmartKey to position 1 in the igni-
tion lock (
Y
page 149).
X
Press on and off switch = on the tire infla-
tion compressor to I.
The tire inflation compressor is switched
on. The tire is inflated.
First, tire sealant is pumped into the tire.
The pressure can briefly rise to approx-
imately 500 kPa (5 bar/73 psi).
Do not switch off the tire inflation com-
pressor during this phase.
X
Let the tire inflation compressor run for a
maximum of five minutes. The tire should
then have attained a pressure of at least
180 kPa (1.8 bar/26 psi).
If a pressure of 180 kPa (1.8 bar/26 psi) has
been attained after five minutes, see "Tire
pressure reached" (
Y
page 326).
Flat tire
325
Breakdow
n
assistance
Z