Mercedes-Benz 2013 GL X166, Руководство оператора

Страница: 388 / 448

R
Do not start the engine if the battery is frozen. Let the battery thaw first.
R
Only jump-start from batteries with a 12 V voltage rating.
R
Only use jumper cables which have a sufficient cross-section and insulated terminal clamps.
R
If the battery is fully discharged, leave the battery that is being used to jump-start connected
for a few minutes before attempting to start. This charges the empty battery a little.
R
Make sure that the two vehicles do not touch.
Make sure that:
R
the jumper leads are not damaged.
R
when the jumper cables are connected to the battery, uninsulated sections of the terminal
clamp do not come into contact with other metal sections.
R
the jumper cables cannot come into contact with parts such as the V-belt pulley or the fan.
These parts move when the engine is started and while it is running.
X
Secure the vehicle by applying the electric parking brake.
X
Shift the transmission to position P.
X
Turn the SmartKey to position 0 in the ignition lock and remove it (
Y
page 159). On vehicles
with KEYLESS-GO, make sure the ignition is switched off (
Y
page 159). All indicator lamps
in the instrument cluster must be off.
X
Switch off all electrical consumers (e.g. radio, blower, etc.).
X
Open the hood (
Y
page 360).
Position number
B
identifies the charged battery of the other vehicle or an equivalent jump-
starting device.
X
Slide cover
:
of positive terminal
;
in the direction of the arrow.
X Connect positive terminal
;
on your vehicle to positive terminal
=
of donor battery
B
using the jumper cable, always begin with positive terminal
;
on your own vehicle first.
X Start the engine of the donor vehicle and run it at idling speed.
X
Connect negative terminal
?
of donor battery
B
to ground point
A
of your vehicle using
the jumper cable, connecting the jumper cable to donor battery
B
first.
386
Jump-starting
Breakdown assistance