Mercedes-Benz 2013 C-Class W204 Sedan, Руководство пользователя

Страница: 60 / 412

The belt strap is tightened slightly when:
R
you engage the belt tongue in the belt
buckle and you then turn the key to position
2 in the ignition lock.
R
the key is in position 2 in the ignition lock
and you then engage the belt tongue in the
buckle.
The seat-belt adjustment will apply a certain
tightening force if any slack is detected
between the occupant and the seat belt. Do
not hold on to the seat belt tightly while it is
adjusting. On vehicles with a luxury multi-
function steering wheel (12 buttons), you can
switch the seat-belt adjustment on and off
using the on-board computer (
Y
page 256).
The seat-belt adjustment is an integral part of
the PRE-SAFE
®
convenience function. More
information about PRE-SAFE
®
can be found
in the "PRE-SAFE
®
(anticipatory occupant
protection)" section (
Y
page 54).
Belt height adjustment
You can adjust the seat belt height on the
driver's seat and the front-passenger seat.
Adjust the height so that the upper part of the
seat belt is routed across the centre of your
shoulder.
X To raise: slide the belt sash guide upwards.
The belt sash guide engages in various posi-
tions.
X
To lower: press and hold belt sash guide
release
:
.
X
Slide the belt sash guide downwards.
X
Let go of belt sash guide release
:
and
make sure that the belt sash guide has
engaged.
Releasing the seat belts
Example: Saloon
X
Press release button
?
on belt buckle
=
.
X
Guide belt tongue
;
back to belt sash
guide
:
.
!
Make sure that the seat belt is fully rolled
up. Otherwise, the seat belt or belt tongue
will be trapped in the door or in the seat
mechanism. This could damage the door,
the door trim panel and the seat belt. Dam-
aged seat belts can no longer fulfil their
protective function and must be replaced.
Visit a qualified specialist workshop.
Belt warning for the driver and front
passenger
The
7
seat belt warning lamp in the instru-
ment cluster is a reminder for all occupants
to fasten their seat belts. It may light up con-
tinuously or flash. In addition, a warning tone
may sound.
The
7
seat belt warning lamp goes out and
the warning tone ceases when the driver and
58
Occupant safety
Safety