Mercedes-Benz 2013 C-Class Coupe, Руководство пользователя

Страница: 379 / 388

engine oils that correspond to the current
technical standard.
Therefore, only Mercedes-Benz approved
engine oils may be used in Mercedes-Benz
engines.
Further information on tested and approved
engine oils can be obtained from any
Mercedes-Benz Service Centre. Mercedes-
Benz recommends that you have the oil
change carried out at a qualified specialist
workshop. Mercedes-Benz approval is indica-
ted on the oil container by the inscription "MB
Approval" and the corresponding designa-
tion, e.g. MB Approval 229.51.
You can call up an overview of approved
engine oils on the Internet at
http://bevo.mercedes-benz.com by enter-
ing the designation, e.g. 229.5.
The table shows which engine oils have been
approved for your vehicle.
Petrol engines: in certain countries, differ-
ent engine oils can be used, provided that the
maintenance intervals are reduced. For more
information, please contact a qualified spe-
cialist workshop.
Petrol engines MB Approval
All models 229.5
Diesel engines with
diesel particle filter
MB Approval
C 220 CDI
C 220 CDI BlueEFFI-
CIENCY Edition
C 250 CDI
C 250 CDI Sport
228.51,
229.31, 229.51
Use only SAE 0W-40 or SAE 5W-40 engine oils
for AMG vehicles.
i
If the engine oils listed in the table are not
available, you may add the following engine
oils until the next oil change:
R
vehicles with a petrol engine: MB
Approval 229.1, 229.3 or ACEA A3
R
diesel engines: MB Approval 229.1,
229.3, 229.5 or ACEA C3
This must only be added once and the
amount must not be greater than 1.0 l.
Capacities
The following values refer to an oil change
including the oil filter.
Model Replacement
amount
C 180
6.0 l
C 200
C 250
C 250 Sport
5.5 l
All other models 6.5 l
C 63 AMG With external oil
cooler: 8.5 l
Additives
! Do not use any additives with the engine
oil. This could damage the engine.
Engine oil viscosity
Viscosity describes the flow characteristics
of a fluid. If an engine oil has a high viscosity
Service products and capacities
377
Technical data
Z