Mercedes-Benz 2011 E-Class Sedan, Руководство оператора

Страница: 129 / 400

X
Pull out bulb holder
;
.
X
Take the bulb out of bulb holder
;
.
X
Insert the new bulb into bulb holder
;
.
X
Insert bulb holder
;
.
X
Align housing cover
:
and turn it
clockwise until it engages.
Infrared light (Night View Assist Plus)
X
Switch off the lights.
X
Open the hood.
X
Turn housing cover
:
counter-clockwise
and pull it out.
X Turn bulb
;
counter-clockwise and pull it
out.
X
Insert new bulb
;
and turn it clockwise.
X
Align housing cover
:
and turn it
clockwise until it engages.
Turn signals (halogen headlamps)
Due to their location, have the bulbs in the
left-hand headlamp changed at a qualified
specialist workshop, e.g. an authorized
Mercedes-Benz Center.
X Switch off the lights.
X
Open the hood.
X Turn bulb holder
:
counter-clockwise and
pull it out.
X
Turn the bulb counter-clockwise, applying
slight pressure, and remove it from bulb
holder
:
.
X
Insert the new bulb into bulb holder
:
and
turn it clockwise.
X Insert bulb holder
:
into the lamp and turn
it clockwise.
Windshield wipers
Important safety notes
G
Warning!
Wiper blades are components that are subject
to wear and tear. Replace the wiper blades
twice a year, preferably in the spring and fall.
Otherwise the windows will not be wiped
properly. As a result, you may not be able to
observe surrounding traffic conditions and
could cause an accident.
! Do not operate the windshield wipers
when the windshield is dry, as this could
damage the wiper blades. Moreover, dust
that has collected on the windshield/rear
window can scratch the glass if wiping
takes place when the windshield/rear
window is dry.
If it is necessary to switch on the windshield
wipers in dry weather conditions, always
use washer fluid when operating the
windshield wipers.
Windshield wipers
127
Lights and windshield wipers
BA 212 USA, CA Edition B 2011; 1; 5, en-US
dimargi
Version: 3.0.3.6
2010-05-20T13:33:46+02:00 - Seite 127
Z