Mercedes-Benz 2011 E-Class Sedan, Руководство оператора

Страница: 331 / 400

X
Make sure pressure release screw
F
on
pressure gauge
G
is fully closed.
X Screw filler hose
D
onto valve
E
.
X
Insert connector
A
into the cigarette
lighter socket (
Y
page 292) or into a 12 V
socket in your vehicle (
Y
page 292).
X
Turn the key to position 1(
Y
page 149) in
the ignition lock.
X
Press on/off switch
?
on the electric air
pump to I.
The electric air pump is switched on. The
tire is inflated.
i First, TIREFIT is pumped into the tire. The
pressure can briefly rise to approximately
500 kPa (5 bar/73 psi).
Do not switch off the electric pump
during this phase.
X
Let the electric pump run for five minutes.
The tire should then have attained a
pressure of at least 180 kPa (1.8 bar/
26 psi).
G
Warning
The air hose can become hot during inflation.
Please exercise appropriate caution.
! Do not operate the electric air pump for
longer than eight minutes at a time without
a break. It may otherwise overheat.
The air pump can be operated again once
it has cooled down.
If, after five minutes, a pressure of 180 kPa
(1.8 bar/26 psi) has been achieved, see
(
Y
page 330).
If, after five minutes, a pressure of 180 kPa
(1.8 bar/26 psi) has not been achieved, see
(
Y
page 330).
TIREFIT kit version 2
X
Pull connector
?
with the cable and hose
A
out of the housing.
X
Screw hose
A
onto flange
B
of TIREFIT
sealant filler bottle
:
.
X
Place TIREFIT sealant filler bottle
:
head
downwards into recess
;
of the electric
air pump.
X
Remove the cap from valve
C
on the faulty
tire.
X
Screw filler hose
D
onto valve
C
.
X
Insert plug
?
into the cigarette lighter
socket (
Y
page 292) or into a 12 V socket
in your vehicle (
Y
page 292).
X
Turn the key to position 1(
Y
page 149) in
the ignition lock.
X
Press on/off switch
=
on the electric air
pump to I.
The electric air pump is switched on. The
tire is inflated.
Flat tire
329
Roadside Assistance
BA 212 USA, CA Edition B 2011; 1; 5, en-US
dimargi
Version: 3.0.3.6
2010-05-20T13:33:46+02:00 - Seite 329
Z