Mercedes-Benz 2011 C 250, Руководство оператора, Страница: 61 / 320

Vehicles without a through-loading feature in the
rear bench seat
Installation instruction
:
indicates the
installation point of securing ring
=
.
X
Remove protective caps
;
from securing
rings
=
by pulling in the direction of the
arrow.
Vehicles with a through-loading feature in the rear
bench seat
X
Install the LATCH-type (ISOFIX) child
restraint system. Comply with the
manufacturer's instructions when
installing the LATCH-type (ISOFIX) child
restraint system.
Top Tether
G
Warning
Observe "Important safety notes"
(
Y
page 55).
G
Warning
Always lock the rear seat backrests in their
upright position when the rear seats are
occupied by passengers. Lock the rear seat
backrests in their upright position before
installing the Top Tether straps or when the
cargo compartment is not in use. Make sure
that rear seat backrests are secured properly
by pushing and pulling on the seat backrests.
If the seat backrest is not locked properly, the
seat backrest could fold forward. The child
restraint system is no longer supported
properly or held in position and can no longer
fulfill its function. This could cause serious or
even fatal injuries.
Top Tether provides an additional attachment
point between the "LATCH" type child seat
mount (ISOFIX) child restraint system and the
rear seat. This can further reduce the risk of
injury.
The Top Tether anchorages are located in the
rear compartment behind the head restraints.
X
Move head restraint
:
upwards.
X
Fold up cover
;
of Top Tether anchorage
=
.
Children in the vehicle
59
Safety
BA 204 USA, CA Edition A 2011; 1; 5, en-US
hereepe
Version: 3.0.3.6
2010-05-20T09:17:30+02:00 - Seite 59
Z