Mercedes-Benz 2010 E-Class Coupe, Руководство оператора

Страница: 279 / 312

recommended to have such work done by a
qualified technician.
Before you start to replace a bulb for a front
lamp, do the following:
X
Switch off the ignition.
X
Turn the exterior lamp switch to position
$
.
X
Open the hood (
Y
page 188).
Releasing/fixing the washer fluid
reservoir
To replace bulbs of the driver’s side
headlamp, the washer fluid reservoir in the
engine compartment must be released.
X
Releasing: Turn screw
;
counterclockwise and remove it.
X
Tilt washer fluid reservoir
:
to the side as
far as necessary to access the headlamp
bulbs.
X
Fixing: Tilt washer fluid reservoir
:
back
into fixing position.
X
Fasten screw
;
by turning it clockwise.
Low beam (halogen headlamps only)
X
Driver’s side only: Release the washer fluid
reservoir (
Y
page 277).
X
Turn housing cover
:
counterclockwise
and remove it.
X
Turn bulb socket
;
counterclockwise and
pull it out.
X
Pull the bulb out of bulb socket
;
.
X
Insert the new bulb into bulb socket
;
.
X
Insert bulb socket
;
into the housing and
turn it clockwise.
X
Align housing cover
:
and turn it
clockwise.
X
Driver’s side only: Fix the washer fluid
reservoir (
Y
page 277).
High beam (halogen headlamps only) or
Corner-illuminating lamp (Bi-Xenon
headlamps only)
Replacing bulbs
277
Practical hints
207_AKB; 2; 35, en-US
d2ureepe,
Version: 2.11.8.1
2009-07-17T07:10:21+02:00 - Seite 277
Z