Mercedes-Benz 2009 CLS 550, Руководство оператора

Страница: 95 / 356

Memory function
93
i At low ambient temperatures, the exterior
rear view mirrors will be heated automati-
cally.
Auto-dimming rear view mirrors
The reflection brightness of the exterior rear
view mirror on the driver’s side and the inte-
rior rear view mirror will respond automati-
cally to glare when the ignition is switched on
and incoming light from headlamps falls on
the sensor in the interior rear view mirror.
The rear view mirrors will not react if the auto-
matic transmission is set to reverse gear
R or
the interior lighting is switched on.
G
Warning!
The auto dimming function does not react
if incoming light is not aimed directly at
sensors in the interior rear view mirror.
The interior rear view mirror and the exte-
rior rear view mirror on the driver’s side do
not react, for example, if the rear window
sunshade is in raised position.
Light hitting the mirror(s) at certain angles
(incident light) could blind you. As a result,
you may not be able to observe traffic con-
ditions and could cause an accident.
Memory function
Notes
With the memory function you can store up
to three different configurations.
Each stored position on the driver’s side
includes the following settings:
R
Seat position
R
Multicontour seat: previously saved setting
R
Steering wheel position
R
Exterior rear view mirrors’ position
G
Warning!
Do not activate the memory function while
driving. Activating the memory function
while driving could cause the driver to lose
control of the vehicle.
Each stored position on the front passenger
side includes the following settings:
R
Seat position
R
Multicontour seat: previously saved setting
M
Memory button
1, 2, 3
Memory position button
Storing positions into memory
X
Adjust the seats, on the driver’s side also
the steering wheel and exterior rear view
mirrors, to the desired positions.
X
Press memory button M.
X Release memory button M and press mem-
ory position button 1, 2 or 3 within 3 sec-
onds.
When the settings are stored to the
selected position, an acknowledgement
signal sounds.
Controls in detail
Z