Mercedes-Benz 2009 C-Class, Руководство оператора

Страница: 120 / 308

X Press button
V
or
U
repeatedly until
the Vehicle status message memory
menu appears in the multifunction display.
If conditions have occurred causing status
messages to be recorded, the number of
messages appears in the multifunction
display.
X
Press button
&
or
*
.
The stored messages will now be displayed
in the order in which they have occurred.
For malfunction and warning messages,
see “Vehicle status messages in the
multifunction display” (
Y
page 228).
Should the vehicle’s system record any
conditions while driving, the number of
messages will reappear in the multifunction
display when the SmartKey in the starter
switch is turned to position
0 or removed
from the starter switch. With KEYLESS-GO,
the number of messages will reappear when
you turn off the engine by pressing the
KEYLESS-GO start/stop button and open the
driver’s door.
Except for high-priority messages, the vehicle
status message memory will be cleared when
you switch off the ignition.
Settings menu
Introduction
In the
Settings
menu there are two
functions: The function
To reset, press
reset button for 3 seconds.
, with which
you can reset all the settings to the original
factory settings and a collection of submenus
with which you can make individual settings
for your vehicle.
The following settings and submenus are
available in the
Settings menu:
R
Resetting to factory settings
(
Y
page 118)
R
Submenus in the Settings menu
(
Y
page 119)
R
Instrument cluster submenu
(
Y
page 119)
R
Lighting submenu (
Y
page 121)
R
Vehicle submenu (
Y
page 123)
R
Convenience submenu (
Y
page 124)
Resetting to factory settings
You can reset the settings of all submenus to
the factory settings.
For safety reasons, the function
Headlamp
Mode
in the
Lighting
submenu cannot be
reset while driving.
X
Press button
V
or
U
repeatedly until
the
Settings
menu appears in the
multifunction display.
X
Press the reset button in the instrument
cluster (
Y
page 108) for approximately
3 seconds.
The request to press the reset button once
more to confirm appears in the
multifunction display.
X
Press the reset button once more.
The settings you have changed will not be
reset unless you confirm the action by
pressing the reset button a second time. After
approximately 5 seconds, the
Settings
menu reappears in the multifunction display.
118
Control system
Controls in detail
219_AKB; 4; 54, en-US
d2ureepe,
Version: 2.11.8.1
2009-05-11T16:21:02+02:00 - Seite 118