Mercedes-Benz 2008 S-Class, Руководство оператора

Страница: 194 / 761

193
Control systems
COMAND navigation system (entering a destination)
or
왘
Select “ Back ” and press
n
.
왘
Confirming selection: Press
n
.
왘
Starting route calculation:
Select “ Start ”, see also (
컄
page 190).
Entering a destination from the list of
last destinations
왘
Select “ Navi ” “ Destination ”
“ From Last Destinations ”.
The list of last destinations appears.
The most recent destination is at the
top of the list.
왘
Select desired destination.
왘
Starting route calculation:
Select “ Start ”, see also (
컄
page 190).
Entering a destination from the map
Calling up the map
왘
In the address input menu, select
“
Map ” (
컄
page 172).
You will see the map with a crosshair.
The map is set to the address set in the
address input menu.
or
왘
Select “ Navi ” “ Destination ”
“ Via Map ”.
You will see the map with a crosshair.
1
Crosshair
2
Details of the crosshair position
3
Map scale
i
The “Back” menu item is only present if this
list was called up from the list with input charac-
ters.
i
Depending on the factory settings of the ve-
hicle, it may not be possible to enter a destina-
tion while the vehicle exceeds a preset speed. As
soon as the vehicles speed drops to below the
preset speed, the function is available again.
You can enter a destination via the map if the dig-
ital map does not contain the address of the des-
tination, but the destination must be within the
area of the digital map.
i
Display
2
may be the name of a road, for
example, provided the digital map contains the
necessary data.
If no data is available, display
2
shows:
앫
the coordinates if the geo-coordinate display
is switched on (
컄
page 170)
앫
no display if the geo-coordinate display is
switched off (
컄
page 170)