437
Practical hints
Replacing bulbs
Tail lamp unit
왘
Open trunk lid.
왘
For driver side: Lift up the bottom and
pull out the trim panel covering the
driver side rear light.
왘
For passenger side: Open the fuse box
in the trunk (
컄
page 458).
1
Tabs
2
Connector
왘
Disconnect electrical connector
2
.
왘
Pull tabs
1
in direction of arrows.
왘
Remove the bulb carrier.
1
Side marker lamp
2
Rear fog lamp (driver’s side)/Side
marker lamp
3
Backup lamp
4
Brake lamp/tail lamp
5
Parking and standing lamp, brake
lamp/tail lamp
6
Turn signal lamp
왘
Press gently onto the respective bulb
and turn counterclockwise out of its
bulb socket.
Side marker lamp
1
: Turn the bulb
socket on backside of tail lamp unit
counterclockwise and removes side
marker lamp
1
with bulb socket
왘
Press the new bulb gently into its bulb
socket and turn clockwise until it
engages.
Side marker lamp
1
: Turn the new
bulb with socket on backside of tail
lamp unit clockwise until it engages.
왘
Reinstall the bulb carrier.
Let tabs
1
(
컄
page 437) engage.
왘
Connect the electrical connector
2
(
컄
page 437) until it engage.
왘
Reinstall trim panel.
License plate lamp
Since replacing the license plate lamp
bulbs is a technically highly demanding
process, we recommend you have the li-
cense plate lamp bulbs replaced at an au-
thorized Mercedes-Benz Center.
Содержание 2008 C 230
