Mercedes-Benz 2006 CL 500, Руководство оператора

Страница: 40 / 456

39
Getting started
Adjusting
Seat height
왘
Press the switch up or down in the di-
rection of arrow
2
.
Head restraint height
왘
Press the switch up or down in the di-
rection of arrow
1
.
Head restraint tilt
Manually adjust the angle of the head re-
straint.
왘
Push or pull on the lower edge of the
head restraint cushion.
For more information, see “Seats”
(
컄
page 112).
Warning!
G
For your protection, drive only with properly
positioned head restraints.
Adjust head restraint so that the center of
the head restraint supports the back of the
head at eye level. This will reduce the poten-
tial for injury to the head and neck in the
event of an accident or similar situation.
Do not drive the vehicle without the seat
head restraints. Head restraints are intend-
ed to help reduce injuries during an acci-
dent.
i
Adjust the head restraint in such a way
that it is as close to the head as possi-
ble.
i
The feature below is deactivated at the
factory for U.S. vehicles. If you wish to
have it activated, contact an authorized
Mercedes-Benz Center.
The front passenger seat head restraint
automatically lowers after a few sec-
onds when the front passenger seat is
not occupied. This improves the
driver’s outward view as well as the for-
ward view from the rear passenger
compartment.
When the front passenger seat is occu-
pied again, the front passenger head
restraint returns to the last set position
within a few seconds.
If the front passenger seat was moved
fore or aft while not being occupied,
the front passenger seat head restraint
returns to a position that corresponds
best with the seat’s axial position when
the seat is occupied again.