Mercedes-Benz 2003 C-Class Coupe, Руководство оператора

Страница: 210 / 356

210
Controls in detail
Useful features
Programming or reprogramming the in-
tegrated remote control
왘
Turn key in the starter switch to
position
1 or 2 .
왘
Hold the end of the hand-held transmit-
ter of the device you wish to train
approximately 2 to 5 inches (5 cm to
12 cm) away from the surface of the in-
tegrated remote control located on the
inside rear view mirror, keeping the in-
dicator lamp in view.
왘
Using both hands, simultaneously push
the hand-held transmitter button and
the desired integrated remote control
button. Do not release the buttons until
completing next step.
왘
The indicator lamp on the integrated
remote control will flash, first slowly
and then rapidly. The rapid flashing
lamp indicates successful program-
ming of the new frequency signal.
왘
When the indicator lamp flashes rapid-
ly, release both buttons.
왘
To program the remaining two buttons,
repeat the above steps.
i
For operation in the USA only: This de-
vice complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions:
앫
This device may not cause harmful
interference, and
앫
this device must accept any inter-
ference received, including interfer-
ence that may cause undesired
operation.
Any unauthorized modification to this
device could void the user’s authority
to operate the equipment.
i
If, after several attempts, you do not
successfully program the integrated re-
mote control device to learn the signal
of the hand-held transmitter, the ga-
rage door opener could be equipped
with the “rolling code feature”.