Mercedes-Benz 2003 C 230 Kompressor Sport, Руководство оператора

Страница: 280 / 376

280
Practical hints
Where will I find ...?
왘
Remove vehicle tool kit storage well
casing
5 .
3 Arrow
4 Minispare wheel
5 Vehicle tool kit storage well casing
6 Vehicle tool kit
Wheel wrench
Vehicle jack
Vehicle jack Vehicles with full size tire spare wheel
The vehicle jack is stored in the space
underneath the trunk floor together with
the vehicle tool kit in the storage tray
(
컄
page 281).
Vehicles with Minispare wheel
The vehicle jack is stored in the space
underneath the trunk floor together with
the vehicle tool kit in the vehicle tool kit
storage well casing (
컄
page 279).
Storage position
왘
Remove the vehicle jack from its
compartment.
i
Arrow 3 on vehicle tool kit storage well
casing 5 must point in the direction of
travel. Otherwise you cannot place the
storage well casing
on top and secure
the Minispare wheel with retaining
screw
1 (
컄
page 279).
Warning!
G
The jack is designed exclusively for jacking
up the vehicle at the jack take-up brackets
built into both sides of the vehicle. To help
avoid personal injury, use the jack only to lift
the vehicle during a wheel change. Never
get beneath the vehicle while it is supported
by the jack. Keep hands and feet away from
the area under the lifted vehicle. Always
firmly set parking brake and block wheels
before raising vehicle with jack.
Do not disengage parking brake while the
vehicle is raised. Be certain that the jack is
always vertical (plumb line) when in use,
especially on hills. Always try to use the jack
on level surface. Make sure that the jack
arm is fully seated in the jack take-up
bracket. Always lower the vehicle onto
sufficient capacity jackstands before
working under the vehicle.
컄컄