REMOTE CONTROL OPERATION
8
REV 1.0
The instructions below apply only to remote controller that comes with FC132124R series ceiling fans.
CODE SWITCH
1.
CODE SWITCH: Codes are set by pushing dip switches up or down. It is imperative that the
code used for both transmitter and receiver
is exactly the same; otherwise remote
controller will not work. Please note the code
switch will enable you to operate a second
remote controller independently. For
example, if you have two ceiling fans with 2
remote control units, set 2 different codes for
each set of transmitter/receivers. This
means you can operate each ceiling fan
independently.
2.
Your remote control is ready for use after a 9V battery installation.
FUNCTIONS OF TRANSMITTER
HI:
Press once to turn on the fan at high speed
MED:
Press once to turn on the fan at medium speed
LOW:
Press once to turn on the fan at low speed
OFF:
Press once to turn off the fan
LIGHT:
Press once to toggle the light on or off
:
Reserved button (no function)
Note : You must replace new battery when its voltage is running low. It is a sign
of weak battery when the transmitter needs to be held at an increasingly
closer distance to fan in order to work.
