333
Reset Button
Use the pin to hold for
5 seconds to reboot
and clear all settings to
factory defaults.
This will allow you
to connect with a
different Wi-Fi network
if required.
Speaker
Two way audio
Grub Screw
Location
USB Port
Power with supplied
cable and 5V DC
adaptor
Status Light
Entering Pairing Mode
Purple,
red,
and
blue
followed by the
doorbell announcing
‘system reset’.
Pairing Mode
Flashing
blue.
The doorbell is now in
pairing mode.
During Pairing
Red,
purple
and
blue
then off.
When motion is
detected or the ring
button is pressed
Red,
blue
then off.
Lost Wi-Fi
Blue
then off.
Ring Button
Press to activate
doorbell
Indoor Chime Unit
The chime unit comes
pre-paired with the video
doorbell
Note: If there isn’t
sound refer to page 8
‘pairing your indoor
chime unit’
Camera Lens
1080p HD, with
120° angle of view
Microphone
Light Sensor/
Infrared LEDs
Detects low light
and turns on the
infrared lights which
allow the camera
to capture both day
and night images.
Identification