3
•
When you need to use the Merax CTYP-28A Drill in open
places, use an extension cord appropriate for open areas,
avoiding the risk of electric shock.
•
Always use safety equipment – safety goggles, mask, safety
shoes, and ear protectors.
•
Do not overload the machine. Use the adequate tool for
type of drilling to be conducted ,guaranteeing the good
quality of the work and the safety in the operation.
•
Do not change tools with the drilling machine turned on.
Always turn machine off and unplug it for your own safety.
Use:
•
This machine is specially designed for perforation of light
steel. It cannot be used for other purposes under any
circumstance. Equipment must not be modified.
Assembly of the Merax CTYP-28A Drill and tools change:
Before using your magnetic drill, you need to install the tools.
The pilot pin must be the first item to be installed in the CTYP-
28A. After that, slide the annular cutter into an adapter. After
your hear a "click" sound, it means that it is locked. Use a hex
wrench text to fasten it, making sure it is securely locked
Warning: make sure the lock is in the annular cutter and not
on the shaft.
To remove the cutting tool (annular cutter), perform
backwards procedure.
