21
STEAM IRONING
Filling the water reservoir
1.
Check that the mains voltage corresponds to the rated voltage on
the type plate.
2.
Press the button and lift up the handle to its upper position.
3.
Check that the power cord is unplugged.
4.
Turn the temperature control to 1.
5.
Open the lid.
6.
Lift the tip of the iron so that you can pour water in without spilling
it.
7.
Pour water slowly from the measuring cup into the reservoir. Do
not fill to more than the maximum level on the reservoir (about 40
ml).
8.
Close the lid.
Temperature setting
1.
Stand the appliance up vertically.
2.
Plug in the power cord.
3.
Turn the temperature control to the required temperature and
wait until the lamp goes off, which means that the set
temperature has been reached.
