Menuett 014815, Руководство по эксплуатации

Страница: 18 / 32

EN
18
DISPLAY
1. Volume unit (fl’oz)
2. Mode selector (arrow buttons)
3. Weight unit (g)
4. Weight unit (lb:oz)
5. Mode selector (arrow buttons)
6. Calibration
7. Volume unit (ml)
FIG. 5
SWITCHING BETWEEN WEIGH
MODES
Weigh mode is enabled when the product starts.
• Press the MODE button to switch modes
(weigh, volume water, volume milk,
volume oil and volume flour).
• Press the UNIT button to select the
required unit.
• Switch between the modes Water - Milk -
Oil - Flour by pressing MODE.
FIG. 6
SWITCHING BETWEEN UNITS
Follow the instructions below to switch between
metric units (kg, g) and imperial units (lb, oz).
FIG. 7
SWITCHING BETWEEN VOLUME
UNITS
1. Press the UNIT button to switch between
ml, fl’oz and CUP in volume measuring
mode. Follow the instructions for
measuring the volume of water.
2. Press the UNIT button.
FIG. 8
HOW TO USE
WEIGH MODE
1. Place the product on a level, stable
surface.
2. Press to start.
3. Wait until the display shows 0.
4. Place the item to be weighed on the scale
and read off the weight on the display.
FIG. 9
VOLUME MEASURING MODE
Follow the instructions in the example below
for measuring milk with the CUP unit.
The same principle applies for oil, flour
and water.
1. Put the beaker on the base. Place the
product on a level, stable surface.
2. Press to start.
3. Wait until the display shows 0. Press the
MODE button to select MILK mode.
4. Press the UNIT button to select the CUP
unit.
5. Pour milk into the beaker. The volume is
shown on the display.
FIG. 10
RESETTING/CALIBRATION
Do as follows to weigh several items after each
other without removing them from the scale.
1. Place the first item on the scale and read
off the weight.
2. Press the button to reset the reading
on the display before putting the next
item on the scale. Repeat as many times
as necessary.