Menuett 014420, Руководство по эксплуатации

Страница: 27 / 27

EN
27
MAINTENANCE
• Make sure the outer fabric is completely
dry before putting it on the thermal
cushion to use or put away.
• Clean with a slightly damp cloth.
• If the thermal cushion is clean and dry it
can be put in its pack and stored in a dry
place when not in use.
• Allow the thermal cushion to cool before
putting away.
• Do not place any objects on top of the
thermal cushion during storage.
NOTE:
• To ensure safe use the thermal cushion
should be placed over the area to be
treated, without pressure from the body.
For best results the cushion should be
covered to prevent the heat spreading
when switched off.
• The thermal cushion has a safety system
that prevents overheating and which
keeps the temperature constant by
switching it off at regular intervals.
ONLY USE THE SUPPLIED CONTROL
UNIT
1. Connect the control unit to the product by
connecting the connector.
2. Plug in the plug and set to maximum
temperature for a short while to quickly
warm up the product. Set the required
temperature (mode 1–3). Mode 1 = 53°C,
mode 2 = 59°C, mode 3 = 65°C (± 5°C).
3. Place the product on the part of the body
to be warmed.
AUTOMATIC SWITCHING OFF
1. The product switches off automatically
after 90 minutes.
2. To start the product again, set the
temperature selector to mode 0, wait a
few seconds and then set the required
temperature again.
SWITCHING OFF
1. Switch off the product by putting the
temperature selector in mode 0.
2. Pull out the plug.