Menuett 008375, Руководство по эксплуатации

Страница: 27 / 28

EN
27
ASSEMBLY
FITTING & REMOVAL OF INSERT
HOLDER/INFEED FUNNEL
1. Hold the insert holder/infeed funnel at a
slight angle to the right, and insert it in
the motor unit.
FIG. 2
2. Turn the insert holder/infeed funnel a
quarter of a turn to the left to lock in
place.
FIG. 3
3. Remove the insert holder/infeed funnel by
turning it a quarter of a turn to the right
and taking it out from the motor unit.
FIG. 4
FITTING AND REMOVING THE
INSERTS
1. Choose a suitable insert.
2. Put the insert in the insert holder. Check
that the insert is correctly placed on the
drive shaft.
FIG. 5
3. Put the insert lock on the drive shaft and
check that it fits properly on the shaft.
FIG. 6
4. Turn the insert lock to the left to lock in
place.
FIG. 7
5. To remove the insert, turn the insert lock
to the right to release it.
FIG. 8
6. Remove the insert lock.
7. Remove the insert.
USE
1. Place the multi shredder on a level, non-
slip surface.
2. Plug into a power outlet.
3. Place a suitable container under the
opening in the insert holder/infeed funnel
to collect the food.
4. Start the multi shredder by pressing in
and holding the power switch. Press and
release the power switch once or twice
before putting food in the infeed opening,
so that the insert locks in place on the
motor unit drive shaft.
FIG. 9
5. Now keep the power switch pressed and
put the food in the infeed opening.
6. Press down the food with the feeder.
FIG. 10
7. Release the power switch to switch off the
multi shredder.
8. Pull out the plug after use.
9. Remove the insert after use.
10. Clean the multi shredder and inserts after
use.
NOTE:
Do not run the multi shredder for more than
two minutes at a time.
WARNING!
Never put your fingers or utensils in the
infeed funnel. Only use the feeder to put in
and press down the food.
MAINTENANCE
CLEANING
• Switch off the multi shredder and pull out
the plug.
• Wipe the motor unit with a damp cloth.
Wipe dry with a dry cloth.
• Clean the insert holder/infeed funnel,
inserts, insert lock and feeder with hot
water and washing-up liquid, or in a
dishwasher.