EN
23
TROUBLESHOOTING
Problem
Possible cause
Action
Status light
ADD WATER
goes on. No water.
Switch off the ice maker with
the button
ON/OFF
, fill with
water and start the ice maker
again.
The status light
ICE FULL
goes on. The ice container is full.
Take ice out of the ice
container. Press the
SELECT
button for 5 seconds.
The ice cubes stick together.
The ice making cycle takes too
long.
Switch off the ice maker and
restart it when the ice cubes
melt. Select small ice cube size
(
S
) with the button
SELECT
.
The temperature of the water
in the container is too low.
Change the water. The
recommended water
temperature is 8–32°C.
The ice making cycle is working
normally, but no ice is produced
The room temperature is too
hot, or the temperature of the
water in the container is too hot.,
The room temperature
should be 10–43°C, and the
water temperature should be
8–32°C.
Refrigerant leakage in the
cooling system.
Contact an authorised service
centre.
Pipe blocked in the cooling
system.
Contact an authorised service
centre.
Содержание 002-204
Страница 3: ...1 2 1 2 3 4 5 6 7 8 9 11 10 ...
